Philips DC200/93 Clock Radio User Manual


  Open as PDF
of 16
 
USING THE ALARM
GENERAL
Two different alarm times can be set. This can be useful when you need to
be woken up at a different time e.g. during the week and at the weekend,
and you can set different wake-up modes:
• Tunermode.
• iPod/USBmode.
• Naturesoundmode.
• Buzzermode.Thegentlewakebuzzeralarmincreasesitsbeeptonefre-
quency within seconds.
SETTING THE ALARM TIME AND MODE
(See 3)
1 In any mode, press and hold 1 ALM or 2 ALM for two seconds.
™
AL1
/
AL2
icon and the hour digits flash.
2
Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
3 Press 1 ALM or 2 ALM
to confirm.
™
AL1
/
AL2
icon and the minutes digits flash.
4
Hold down or press ¡1 / 2™ repeatedly to set and adjust the mintues.
5 Press 1 ALM or 2 ALM
to confirm.
™
The icon for the current alarm mode flashes.
6
Press ¡1 2™ / SOURCE repeatedly to select your desired alarm mode.
• ForNaturesoundmode,pressALBUM/PRESET -/+
1 / 2
to select
your desired nature sound track.
™
At the set alarm time, the selected sound source or buzzer will
switch on automatically.
Helpful hints:
–
If you have selected TUNER alarm mode, make sure you have properly tuned to
a station before turning off the set.
–
If you have selected iPod/USB alarm mode, make sure you have connected
the compatible iPod player or USB device, or the buzzer mode will be selected
automatically.
–
To check the alarm time setting for AL1 or AL2, press 1 ALM or 2 ALM.
 previous next