Filter
Top Products
CASSETTE RECORDER
17
English
AZ 5130 page 17AZ 5155 page 17
1. Set the source selector to TAPE/OFF.
2. Press
STOP•OPEN 9/
to open the cassette holder.
3. Insert a recorded cassette.
4. Press PLAY 1 and playback will start.
5. Adjust the sound using the VOLUME and DYNAMIC BASS
BOOST controls.
6. For brief interruptions, press PAUSE ;. Press PAUSE ; again to
resume playback.
7. By pressing 5 or 6,fast winding of the tape is possible in both directions.
8. To stop playback, press
STOP•OPEN 9/
™ The keys are automatically released at the end of the tape.
9. Set the source selector to TAPE/OFF position (with the
cassette keys are released) to switch off the set.
General information on cassette recording
• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II)
or METAL (IEC IV) type cassettes. For recording you should
use NORMAL type cassettes (IEC I) on which the tabs have
not been broken.
• Check and tighten slack tape before use with a pencil, to
avoid jamming the deck machanism.
• The recording level is set automatically. Altering the VOLUME
and DYNAMIC BASS BOOST controls will not affect the
recording in progress.
• No recording will take place during the 3 seconds, when the
leader tape passes the recorder heads.
Notes : -No recording will take place during the 7 seconds in the
beginning of the tape.
•To prevent the accidental erasure of a recording, keep the cassette side to be safeguarded in
front of you and break out the left tab. Recording on this side is no longer possible.
1
CASSETTE RECORDING
CASSETTE PLAYBACK
SEARCH
E
I
N
C
R
E
D
I
B
L
S
U
R
R
O
N
D
U
L
T
R
A
B
N
A
M
I
C
B
A
S
S
BO
O
S
T
RE
CO
RD
PL
A
Y
S
EA
RC
H
S
T
OP-
OP
E
N
P
A
U
S
E
AZ5155/01 eng 7/18/03 8:58 PM Page 17