Filter
Top Products
CD/VCD/MP3-CD
12
English
Programming tracks of disc is possible when playback is stopped. Up to 20 tracks can be stored in
the memory in any order.
1. In stop mode, press PROG on the remote control to enter programme setting.
™ PROG will flash on the display.
2. Press digits 0 - 9 on the remote control or
∞ / §
to select the desired track.
3. Press PROG to store the select track. The number “XXX” represents the track no.
•
Repeat steps 1 to 3 to store other tracks.
4. Press 9 to end programme setting.
™ PROG will remain on the display.
•
Press PROG (on remote control) in stop mode to review the programme sequence.
5. Press
2;
to play the programmed tracks.
•
If you press REPEAT during programme playback, the current track or all programmed tracks will
be played repeatedly.
™ REPEAT/REPEAT ALL icon and PROG will appear on the display.
6. Press 9 in stop mode to clear the programme.
™ PROG will disappear from the display.
Notes : -The programming is automatically cleared as soon as the CD compartment is opened.
- The function of programme setting is disabled in PLAY/PAUSE mode.
- Programme cannot be used for VCDs when PBC is switched on. Switch off PBC before
storing tracks from such a VCD.
For MP3-CD only
1. In stop mode, press
PROG
on the remote control to enter programme setting.
™
PROG
will start flashing and " P01" will be displayed.
™ On TV screen, "PROG" program list (5 lines per page) will be displayed.
2. Press digits 0 - 9 on the remote control or
¡ / ™
to select the desired album.
3. Press
PROG
to store the select album. The number “AXX” represents the album no.
4. Press
∞ / §
repeatedly (or digits 0 - 9 on the remote control) to select the desired TRACK for
programming.
5. Press
PROG
to store the select track.
™ PROG will remain on the display.
•
Repeat steps 1 to 5 to store other desired album and track.
6. Press 9 to end programme setting.
•
Press
PROG
in stop mode can review the programme sequence.
7. Press 2 to start programme playback. You can press
∞ / §
to select the programmed track to
play.
8. Press 9 once stop programme playback or twice to clear the programme.
PROGRAMMING TRACKS
AZ 5155 page 12
AZ5155/01 eng 7/18/03 8:58 PM Page 12