Filter
Top Products
Selecting a different track
• Press SEARCH ∞ or § once or repeatedly
until the desired track number appears in the
display.
For MP3: first press ALBUM/PRESET -/+
to find your album.
• In the pause/stop position, press
PLAY/PAUSE 2/
;
to start playback.
Finding a passage within a track
1 During playback, press and hold ∞ or §.
➜The CD is played at high speed and low
volume.
2 When you recognize the passage you want,
release ∞ or § to resume normal playback.
Different play modes: RANDOM and
REPEAT (see 7 – 9)
RANDOM – tracks of the entire disc are
played in random order
– plays the current track
continuously
REPEAT ALL – repeats the entire disc/
program
For MP3 only:
REPEAT ALBUM – all tracks of current album
play repeatedly.
1 To select play mode, press MODE once or
more.
For RANDOM: select the mode before
playback
2 Press 2/
;
to start playback. if in the stop
position.
3 To select normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
Helpful hints: In RANDOM mode, press ∞ to go
to the beginning of current track.
Programming track numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
For Audio CD:
1 In the stop position, press PROG to activate
programming.
➜ Display: MEMORY and 00 flash.
2 Press
∞
or
§
to select your desired track
number.
➜ Display: MEMORY and your desired track
number flash.
3 Press PROG to store the desired track
number.
➜ Display: MEMORY and 00 flash for you to
programme the next track.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ Display shows --after 20 tracks are
stored
5 To play your programme, press 2/
;
.
For MP3:
1 In the stop position, press PROG to activate
programming.
➜ Display: ALBUM and current album
number
➜ Then, MEMORY and 000 flash.
2 If necessary, press ALBUM/PRESET -/+ to
select another album
➜ Display: ALBUM and the selected album
number (see 0)
➜ Then, MEMORY and 001 flash (see !)
3 Press
∞
or
§
to select your desired track
number.
➜ Display: MEMORY and the selected track
number in current album
CD/MP3 Player
CD/MP3 Player
4 Press PROG to store the desired track
number.
➜ Display: MEMORY and 000 flash for
you to programme the next track (see
@)
5 Repeat steps 2 to 4 to select and store all
desired tracks in this way.
➜ Display shows --after 20 tracks are
stored.
6 To play your programme, press 2/
;
.
Helpful hints:
– When playback of your programme
comes to the stop position, your set will
return to normal playback.To re-enter
program mode, press PROG in the stop
position.
–
When the program or RANDOM mode is active, use
of the
ALBUM/PRESET -/+
keys are void
.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored track numbers.
➜ Audio CD: a stored track number appears
MP3: ALBUM and an album number
appear, then a stored track number in the
album is displayed
– only track number appears if in the same
album
Erasing the program
You can erase the contents of the memory
by:
– selecting
TUNER
sound source;
– opening the disc door;
– in the stop position, press PROG to enter
program mode and then, press
9.