Filter
Top Products
Power Supply Basic Functions
Power supply
Whenever convenient, use AC power if you
want to conserve battery life. Make sure you
remove the plug from the set and wall outlet
before inserting batteries.
Batteries (not included)
• Insert 8 batteries, type R-14, UM2 or
C-cells (preferably alkaline) with the correct
polarity (See 2)
Batteries contain chemical substances, so
they should be disposed of properly.
Incorrect use of batteries can cause elec-
trolyte leakage and will corrode the compart-
ment or cause the batteries to burst:
• Do not mix battery types: e.g. alkaline with
carbon zinc. Only use batteries of the same
type for the set.
• When inserting new batteries, do not try to
mix old batteries with the new ones.
• Remove the batteries if the set is not to be
used for a long time.
Using AC power
1 Check if the power voltage, as shown on
the type plate located on the
back of the set, corresponds to your local
power supply. If it does not, consult your
dealer or service center.
2 Connect the power cord to the AC ~ inlet
and the wall socket.The power cord is now
connected and ready for use.
3 To switch the set off completely, withdraw the
power cord from the wall socket.
• Disconnect the power cord from the wall
socket to protect your set during heavy
thunderstorms.
The type plate is located on the back of
the set.
Basic functions
Switching on and off and selecting
functions
1 To switch on, push the Source selector
slider to CD or TUNER
as desired.
➜ The display lights up blue
2 To switch off, push the Source selector
slide to
OFF
.
Helpful hints:
– The radio presets will be retained in the set’s
memory.
Adjusting volume and sound
1 Adjust the volume with the
VOLUME
control.
2 Press DBB once or more to select dynamic
bass boost on or off.
English Controls
Supplied accessories
–
AC power cord
Right panel (See 1)
1
Source selector: CD,TUNER, OFF
–
selects CD/MP3 or radio source of sound
–
switches off the set
2 MONO
•
STEREO
– selects mono or stereo FM reception
Top and front panels (See 1)
3 VOLUME – adjusts volume level
4 LIFT TO OPEN– lift here to open the disc
door
5 Display – shows the status of the set
6 PROG
CD/MP3: programs tracks and reviews the
program;
TUNER: programs preset radio stations
7 DBB – turns the bass enhancement
on / off
8 ALBUM/PRESET -
MP3 only: selects albums (down);
TUNER: selects preset stations (down)
9 SEARCH
∞ , §
CD/MP3: – searches back and forward
within a track;
– skips to the beginning of a
current track/ previous/ later
track
TUNER: tunes to radio stations
0 STOP/BAND
9
CD/MP3: – stops playback;
– erases a program.
TUNER: selects wavebands
! PLAY/PAUSE 2/
;
– starts/ pauses CD
playback
@ MODE – selects different play modes:
e.g. REPEAT or RANDOM
(random order)
# ALBUM/PRESET +
MP3 only: selects albums (up);
TUNER: selects preset stations (up)
Back panel (See 2)
$ Telescopic antenna - improves FM
reception.
% AC ~ - inlet for power cord
^ RESET – use ball-point pen to press the
hole if the set or display does not
react to any of the controls
& p PHONES- 3.5mm stereo headphone jack
* Battery door - open to insert 8 x 1.5V
R-14/ UM2/ C-cells.