Filter
Top Products
7 EN
Set time
1 Rotate the Third Knob to "SET TIME" to
activate clock setting mode.
» Hour and minute digits blinks.
2 Rotate the First Knob to adjust the hour.
3 Rotate the Second Knob to adjust the
minute.
4 Press OK on the First Knobtoconrm.
» The setting time is displayed.
5 Rotate the Third Knob to CLOCK after
setting.
» The hour and minute digits stops
blinking.
Turn on
The clock radio turns on automatically once
your plugged in.
4 Play from
Bluetooth
device
Note
• The effective operation range between the Bluetooth
speaker and the paired device is approximately 10
meters (30 feet).
• Keep this Bluetooth speaker away from other electronic
devices that may cause interference.
• Make sure that the Third Knob switches to CLOCK
before setting.
1 Press SOURCE repeatedly to select
Bluetooth source.
» onthedisplaypanelashes.
2 Activate the Bluetooth function in your
Bluetooth device (see the device user
manual).
3 Select “AJT600” displayed on your device
for pairing.
» If connection is successful, the
Bluetooth speaker beeps twice and
steadily on.
4 Start music play on your Bluetooth device.
» If Bluetooth disconnected, the music
will pause. Press on the Bluetooth
device to start play again.
Bluetooth reset
In Bluetooth mode, press OK ontherst
knob for over 5 seconds to erase all pairing
informations.
» "BT RESET" displayes on the panel.
• The Bluetooth speaker enters
Bluetooth mode automatically after
erase completed.