Filter
Top Products
10EN
7 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 5W RMS
Bluetooth
Bluetooth
specication
V3.0+EDR
Supportedproles HFP v1.5, AD2P v1.2,
HSP v1.2
Range 10 m (Free space)
General information
Power supply
-AC Power
-Battery
Model:
ASSA36A-090160;
Input: 100-240 V ~,
50/60Hz, 0.6A;
Output: 9.0V 1600
mA
2 x AA batteries
Operation Power
Consumption
<15 W
Standby Power
Consumption
<1 W
Dimensions - Main
Unit (W x H x D)
195 x 99 x 98 mm
Weight - Main Unit 0.70 kg
8 Troubleshooting
Warning
• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page (www.
philips.com/support). When you contact Philips,
make sure that the device is nearby and the
model number and serial number are available.
No power
• Ensure that the power cord is connected
securely.
• Ensure that there is power at the power
supply socket.
• Ensure that the batteries are installed
correctly.
No response from the Bluetooth speaker
• Disconnect and reconnect the AC power
plug, then turn on the Bluetooth speaker
again.
• Check if you have selected the correct
audio source.
• Make sure that your Bluetooth device is
within the effective operation range.
Alarm does not work
• Set the clock/alarm correctly.
Clock/alarm setting erased
• Power has been interrupted or the power
plug has been disconnected.
• Reset the clock/alarm.