Filter
Top Products
Sleep
The clock radio has a built-in sleep timer,
which enables the set to automatically turn
off sound during radio or music playback
after a set period of time.
Option 1:
1 Press TUNER.
2 Press SLEEP until your desired sleep option
is displayed.
➜Radio will turn on if radio was previously
turned off.
Option 2:
1 Press CLOCK or PHOTO/VIDEO to
enter respective mode.
2 Press MENU.
3 Press 12 to highlight “General”.
4 Press 34 to select “Sleep Timer Music”.
5 Press 12 to select specific music you like.
➜The set will turn on with the music you
select.
Option 3: using USB/Memory card
(SD/MMC)
1 Repeat steps 1-8 described in “Listening to
music”.
2 Press SLEEP until your desired sleep option
is displayed.
To deactivate sleep function
When sleep is activated, is display.
• Press SLEEP until “Off” is displayed.
Illumination brightness
The LCD brightness can be adjusted
manually and automatically.
Manually adjusting
• Press REPEAT ALARM /
BRIGHTNESS
CONTROL
once or more to cycle screen
brightness through 4 levels.
Automatically adjusting
To avoid strong light emitting from the unit at
night time, the auto dim function can be used
to adjust the brightness to the lowest level
automatically.
1 Press MENU.
2 Press 12to highlight “General”.
3 Press 34 to select “Auto Dim Timer”.
4 Press 12to select “On”.
5 Press 34 to select “Auto Dim - Start”.
6 Press 12to select the time that auto dim
will start.
7 Press 34 to select “Auto Dim - End”.
8 Press 12to select the time that auto dim
will end.
• When auto dim is set, during auto dim time
span, the LCD brightness will be auto
adjusted to the lowest level. Press any
button to increase the brightness and it will
last 10 seconds.
Using the stand
The set is equipped with a stand on the
bottom panel.To set the set for a different
viewing angle take the stand out, then place it
back by reversing (see the figure below) the
side of the stand.
Sleep / Illumination
AJL308_55_CCR 2008.3.25 14:20 Page 10