Filter
Top Products
Setup-Slideshow Setup - Auto Brightness
Setting Slideshow
You can toggle slideshow on or off, and set
the frequency of slideshow.
1 Press UP or DOWN repeatedly to highlight
Slideshow.
2 Press SELECT.
The set enters slideshow setup mode.
On/Off is highlighted.
3 Press SELECT.
On, Off are displayed on the second
display.
4 Press UP or DOWN repeatedly to switch
slideshow on or off.
5 Press BACK to return.
6 Press DOWN to highlight Frequency.
7 Press SELECT.
8 Press UP or DOWN to switch between
the following intervals:
5 sec->30 sec->1 min->10 min->30 min.
9 Press BACK to exit setting.
➜
➜
➜
Setting Auto Brightness
The set can automatically dim at the start
time and light up at the end time.
1 Press CLOCK.
2 Press SETUP.
3 Press DOWN repeatedly to highlight Auto
Brightness.
4 Press SELECT.
5 Press SELECT.
6 Press UP or DOWN repeatedly to switch
Auto Brightness function on or off.
7 Press BACK to return.
8 Press DOWN repeatedly to highlight
Timer Settings.
9 Press SELECT.
10 Press or hold HOUR+ below the second
display or DOWN to select the desired
start time.
11 Press or hold HOUR+ below the second
display or DOWN to select the desired end
time.
12 Press BACK to exit setting.
Helpful hints:
You can set the timer to start at night
and end in the morning so that AJL305
automatically dims at night and lights up in
the morning.
–