SAFETY
6
English
SAFETY INSTRUCTIONS – Read before operating equipment
This product was designed and manufactured to meet strict
quality and safety standards. There are, however, some
installation and operation precautions which you should be
particularly aware of.
1. Read Instructions - All the safety and operating
instructions should be read before the appliance is operated.
2. Retain Instructions - The safety and operating instructions
should be retained for future reference.
3. Heed Warnings - All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow Instructions - All operating and use instructions
should be followed.
5. Water and Moisture - The appliance should not be used
near water - for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement or near a swimming
pool, etc.
6. Carts and Stands - The appliance should be used only
with a cart or stand that is recommended by the
manufacturer.
6A. An appliance and cart combination should be
moved with care. Quick stops, excessive force,
and uneven surfaces may cause the appliance
and cart combination to overturn.
7. Wall or Ceiling Mounting - The appliance should be
mounted to a wall or ceiling only as recommended by the
manufacturer.
8. Ventilation - The appliance should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the appliance should not be
situated on a bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in a built-in
installation, such as a bookcase or cabinet that may impede
the flow of air through the ventilation openings.
9. Heat - The appliance should be situated away from heat
sources such as radiators, heat registers, stoves, or other
appliances (including amplifiers) that produce heat.
10.Power Sources - The appliance should be connected to a
power supply only of the type described in the operating
instructions or as marked on the appliance.
11.Grounding or Polarization -
The precautions that should be
taken so that the grounding or
polarization means of an
appliance is not defeated.
CAUTION: To prevent electric shock, match the
wide blade of this plug to the wide slot, fully insert. Do not
use this (polarized) plug with an extension cord, receptacle
or other outlet unless the blades can be fully inserted to
prevent blade exposure.
12.Power-Cord Protection - Power supply cords should be
routed so that they are not likely to be walked on or pinched
by items placed upon or against them, paying particular
attention to cords and plugs, convenience receptacles, and
the point where they exit from the appliance.
13.Cleaning - The appliance should be cleaned only as
recommended by the manufacturer.
14.Power Lines - An outdoor antenna should be located away
from power lines.
15.Nonuse Periods - The power cord of the appliance should
be unplugged from the outlet when left unused for a long
period of time.
16.Object and Liquid Entry
- Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
17.Damage Requiring Service - The appliance should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has spilled into the
appliance; or
C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or
exhibits a marked change in performance; or
E. The appliance has been dropped, or the enclosure
damaged.
18.Servicing - The user should not attempt to service the
appliance beyond that described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
91/8 EL 4562-1
AC
Polarized Plug
WARNING
To reduce the risk of fire or electric
shock, do not expose this appliance to
rain or moisture.
CAUTION
Use of controls or adjustments or
performance of procedures other than
herein may result in hazerdous
radiation exposure
The set complies with the FCC-Rules, Part 15
and with CFR 1040,10. Operation is subject to
the following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any interference
received, including interference that may
cause undesired operation
XP AJ 3940/3941/17.1 29-03-2001 10:57 Pagina 6