Filter
Top Products
CD Player Auxiliary connection/Alarm
Selecting different play modes:
REPEAT and SHUFFLE
You can select and change the various play
modes before or during playback, and
combine REPEAT modes with program.
SHUFFLE – plays all tracks in random
order.
REPEAT – plays the current track
continuously.
REPEAT ALL – plays the entire disc/
program continuously.
1 To select play modes, press MODE once or
more.
➜ The selected play mode will be displayed.
2 Press ); to start playback if in the stop
postion.
➜ When SHUFFLE mode is selected, the
disc will play automatically around few
seconds later.
3 To return to normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press 9 once to cancel your
play modes.
Notes:
– During playback, when shuffle mode is
selected, shuffle play will begin only when
playback of current track comes to an end.
– Selection of shuffle mode is not available in
the program mode.
Connecting an external device
You can listen to the sound of the connected
external device through your AJ3916’s
speakers.
1 Press SOURCE to switch to AUX mode
➜ ‘ ’ is displayed
2 Connect an external equipment such as MP3
player to AJ3916's AUX-in
Helpful hints:
– AJ3916 cannot control playback or any
function on the external equipment
– Ensure the external equipment is powered
on.
Using the alarm
Two different alarm times can be set.This can
be useful when you and your partner need
to be woken up at different time. Besides, you
can set different alarm sounds respectively
among: CD( ), tuner( ), buzzer( ), or
sound of nature( ).
SETTING THE ALARM
1 Press and hold ALARM 1 until hour digits
start flashing.
2 Hold down or press ∞ / § repeatedly to
set the desired hour.
3 Press ALARM 1 to confirm.
➜ Minute digits start flashing.
4 Hold down or press ∞ / § repeatedly to
set the desired minute.
5 Press ALARM 1to confirm.
➜ is displayed.
6 Press SOURCE repeatedly to select the
desired alarm sound.
➜ when sounds of nature is selected, press
PRESET +/– to select any one of the 5
provided sounds ( ).
➜ when CD is selected, press ∞ / § to
select the desired track.
7 Press ALARM 1 to confirm.
8 Repeat the steps above but press ALARM 2
instead of ALARM 1 to set the other alarm.
Helpful hints:
– Insert a CD if you select CD source as
alarm mode. CD will play from the first
track, or the track you have selected during
the alarm setting. If a CD is not loaded,
Church Bell (sound of nature) will auto turn
on.
– To check the alarm time setting for
ALARM 1 or ALARM 2, press ALARM
1 or ALARM 2.