Filter
Top Products
CD playback
This CD clock radio supports audio discs
including CD-R (CD-recordable), CD-RW
(CD-rewritable). Do not try to play a
MP3-CD, CD-ROM, CDI,VCD, DVD or com-
puter CD.
1 Press STANDBY-ON to switch on from
clock mode.
2 If CD is not selected, press SOURCE once
or more to select it.
➜ is displayed.
3 Lift the CD door to open.
4 Insert a CD with printed side facing up, and
close the CD door.
➜ Flashing ---- is displayed briefly, then total
CD track number and the clock are
displayed. (See 3)
5 Press ); to start playback.
➜ During the playback, the current track
number is displayed instead of the total
track number.
6 To view Clock, press DISPLAY.
➜ The clock time is displayed for several sec-
onds, then it will switch back to playback
time information.
7 To adjust the sound, press VOLUME.
8 To interrupt, press );.To resume playback,
press ); again.
9 To stop playback, press 9.
10 To switch off CD playback and back
to standby, press STANDBY-ON.
➜ The clock is displayed.
Selecting a different track
• Press ∞/ § once or repeatedly until the
desired track number appears on the display.
• In the stop position, press ); to start
playback.
Finding a passage within a track
1 During playback, press and hold down
∞ or §.
➜ The CD is played at high speed and low
volume.
2 Release ∞ or § when you recognize the
passage you want.
➜ Normal CD playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence for playback. If you like, store any
track more than once.
1 In the stop position, press PROG to enter
programming mode.
➜ P01 is displayed (See 4
).
2 Press ∞ or § to select desired track.
3 Press PROG to store the track.
➜ P02 is displayed
4 Repeat steps 2 to 3 to select and store all
desired tracks.
➜ If you attempt to store more than 20
tracks, no tracks can be stored.
5 Press ); to play the program.
➜ PROG is displayed (See 5)
To erase a program, select any of the
following.
– In stop position press PROG to enter pro-
gram mode and press 9;
– Open the CD door.
– Press STANDBY-ON to standby;
– Select other sources.
CD Player