Philips AJ301DB/79 MP3 Docking Station User Manual


 
Remote control
Important!
Before using the remote control, remove the insulation plastic tab as
shown in the figure.
If the remote control does not function correctly or the operating
range is reduced, replace the battery with a new (CR2025) type
battery.
1.
Pull the battery tray out as shown in the figure.
2.
Replace a new battery according to polarity indication, and fully insert the
battery tray back to the original position.
Batteries contain chemical substances, so they should be disposed of
properly.
SELF-POWERED BACK-UP
The self-powered back-up conveniently allows your preset stations, alarm and clock
time settings to be stored for up to 10 minutes when there is a power interruption
e.g. AC power failure. The complete clock radio and backlight illumination will be
switched off.
If power supply returns after 10 minutes and the display shows:
clock time blinking - indicates you need to re-adjust the clock time.
English
Congratulations on your purchase, and welcome to Philips! To fully
benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
SUPPLIED ACCESSORIES
1 X certified AC/DC adapter: OH-1018A0902000U-SAA
(Input: 100-240V ~ 50/60Hz 650mA, Output: 9V 2A)
Docking kit
• 1X Apple iPod dock (pre-installed with AJ301DB);
• dock adapters (4 adapters for different iPod types)
1 X AUX-IN cable
CONTROLS
(See 1)
1
POWER
switches the system on or to standby mode
stops active alarm for 24 hours
deactivates the sleep function
2
¡1 / 2™
adjust clock/alarm time
selects previous/next tracks in the dock mode
fast searches forward/backward in the dock mode
3
PRESET 1-5
stores, recalls and shows radio station
4
SLEEP
activates the sleep function
deactivates the sleep function
5
DOCK
selects dock mode for Apple iPod
6
TUNER/ AUX
selects FM radio mode
selects AUX mode
7
2;
starts/pauses playback in the dock mode
selects 12 hour or 24 hour mode
2
3
1
CAUTION
High voltage! Do not open.You run the risk of getting an electric
shock. The machine does not contain any user-serviceable parts.
Modification of the product could result in hazardous radiation of
EMC or other unsafe operation.