Philips AE2790 Portable Radio User Manual


 
Congratulations on your purchase and
welcome to Philips!
To fully benifit from the support that
Philips offers,register your product at
www.philips.com/welcome.
Supplied Accessories
–1 x AC/DC certified switching adapter
(Model No.:ED4120090060A,
Input: 230V~ 50Hz,70mA,
Output: 9V, 600mA)
– Audio cable
Top & front panels (see 1 )
1
PRESET
stores and recalls 10 FM and 10 MW sta-
tions
1 / 2
TUNING
+/–
– in FM/MW mode, fine tunes a station
SOURCE
selects FM, MW, or AUXmode
2
2
switches on/off the standby mode
3
MEMORY/AUTO SCAN
– in FM/MW
mode,
scans stations
and stores them as presets automatically
4
DBB/SET TIME
– in
standby mode, sets the clock
switches DBB sound effect on or off
5
TIMER
– sets the time to switch on or off the set
automatically
6
SLEEP
switches the set off automatically after the
set time
7 VOLUME +/– – adjusts volume level
8
LCD display
displays FM/MW radio and time information
Back panel (see 1)
9
Telescopic antenna
improves FM reception
0
p
3.5 mm stereo headphone socket
!
DC jack
– inlet for power cord
@
AUX IN
– inlet for external sound source
CAUTION
High voltage! Do not open.You run
the risk of getting an electric shock.
The machine does not contain any
user-serviceable parts.
Modification of the product could
result in hazardous radiation of
EMC or other unsafe operation.
This set complies with the radio
interference requirements of the
European Union.
Power Supply
Whenever convenient, use the mains supply
cord if you want to conserve battery life.
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not included)
1 Open the battery door and insert 6 batteries,
type R-14, UM-2 or C-cells, (preferably
alkaline) with the correct polarity as indicated
by the "+" and "" symbols inside the com-
partment (See 1).
2 Replace the battery door, making sure the bat-
teries are firmly and correctly in place.The set
is now ready to operate.
Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or
cause the batteries to burst:
Do not mix battery types:e.g. alkaline with car-
bon zinc. Only use batteries of the same type
for the set.
When inserting new batteries, do not try to mix
old batteries with the new ones.
Remove the batteries if the set is not to be used
for a long time.
Batteries contain chemical substances, so
they should be disposed of properly.
English Controls/Power Supply
AE2790_12_A_CCR 2008.2.19 16:26 Page 5