Filter
Top Products
Storing preset stations auto-
matically
• In FM, MW, SW, and LW mode, press and
hold AUTO SCAN until SCAN appears.
➜ The set scans stations with strong signal
strength and stores them as preset sta-
tions automatically.
Storing preset stations manu-
ally
You can store up to 10 stations for each band
respectively on
PRESET
for easy access.
1 In FM,MW,SW,and LW mode, tune to your
desired radio station (See "Auto tuning" and
“Manual tuning”).
2 Press and hold number keys to store the pre-
set station.
Helpful hints:
– If you have already saved a FM, MW,SW, or
MW station in that preset number,it will be
overwritten by a new station.
– Preset stations of each band do not overwrite
each other.
Selecting a preset station
• In FM, MW,SW, and LW mode, press NUM-
BER 1-10.
Viewing clock
You can also view clock in tuner mode.
• Press DISPLAY repeatedly.
Setting time
You can only set time in standby mode.
1 Press and hold SET TIME until hour digits
flash.
2 Press VOLUME +/- to set hour.
3 Press SET TIME once to confirm.
➜ The minute digits flash.
4 Press VOLUME +/- to set minute.
5 Press SET TIME once to confirm.
➜ The set exits time setting.
Helpful hints:
– During setting time, if you press
2
or do
not operate for more than 10 seconds, the
set automatically exits time setting.
Setting timer
You can only set timer in standby mode.
1 Press and hold TIMER/SET TIMER until
appears and hour digits flash.
2 Press VOLUME +/- to set hour.
3 Press TIMER/SET TIMER once to con-
firm.
➜ Minute digits flash.
4 Press VOLUME +/- to set minute.
5 Press TIMER/SET TIMER once to con-
firm.
➜ appears.
➜ Hour digits flash.
6 Press VOLUME +/- to set hour.
7 Press TIMER/SET TIMER once to con-
firm.
➜ Minute digits flash.
8 Press VOLUME +/- to set minute.
9 Press TIMER/SET TIMER once to con-
firm.
➜ FM, MW,SW, or LW flashes.
10 Press VOLUME +/- or SOURCE to select
band for timer.
➜ Preset station number flashes.
11 Press VOLUME +/- or press the desired
number key to set preset station number.
12 Press TIMER/SET TIMER once to con-
firm.
➜ Volume level digits flash.
13 Press VOLUME +/- to set the volume level
for timer.
14 Press TIMER/SET TIMER once to con-
firm and exit timer setting.
OFF
ON
Radio Clock/Timer
A 2008.3.25 11:47 Page 8