Filter
Top Products
18
Parrot PARTY
TROublEShOOTING
I used a Jack audio cable
to connect my audio player,
but I get no sound.
- Check that the jack audio cable
is properly plugged in to the Parrot
PARTY and audio player.
- Check that there is no Bluetooth
connection with an audio player.
The Bluetooth connection will take
priority over the Jack connection.
My Parrot PARTY makes
a noise when I use
a jack audio cable.
- Check that the jack audio cable
is properly plugged in to the Parrot
PARTY and audio player.
I am using my PC as
a Bluetooth audio player,
but there is no sound coming
from my Parrot PARTY.
- Check that the «Sound
playback» option is set to «High-
quality Bluetooth Audio».
You can find this option
by selecting Start/Settings/Control
panel/Sound and Audio Devices/
Audio on your computer.
When I watch a video, the
sound from the Parrot PARTY
is not synchronised with the
image.
- Use the Parrot Audio
Configuration Tool to check
that your system’s audio delay
is correctly configured
for this type of use.
Problem Solution
No sound is coming through
the Parrot PARTY.
- Ensure that the device is
switched on (ON/OFF switch
on the back of the device) and
sufficiently powered.
- Check that your device supports
the Bluetooth A2DP profile and
the source role.
I cannot connect my audio player
to the Parrot PARTY.
- Hold down the Configuration
button on the Parrot PARTY for
two seconds, then restart
the search and connect.
The centre LED on the Parrot
PARTY is red.
- The red colour means that the
battery level is low (battery life is
less than 15 min). Plug the Parrot
PARTY into the mains: the LED
turns violet to indicate that the
device is being charged and then
turns blue once the battery has
been fully recharged.