Filter
Top Products
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
After step 2, press [MEMORY] (remote control) the de-
sired number of times.
∫ If “'” is displayed
No more tracks may be programmed.
∫ To confirm the contents of the program
Press [MEMORY] (remote control) while the disc is
playing. (The numbers of the programmed tracks ap-
pear on the display in sequence. The display stays lit as
long as the tracks continue to be displayed.)
∫ To delete the entire program
Press [∫] (main unit) or [1/∫] (remote control).
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
6
Remote control only
Remote control only
E
C
EQ
MODE MEMORY
Skip play
The disc plays from the selected track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Other Play Methods
The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section (See page 3.).
G
EQ
MODE MEMORY
A
G
EQ
MODE MEMORY
A
I
EQ
MODE
MEMORY
E
C
EQ
MODE MEMORY
Repeat play/Random play
Press during play or stop mode.
The setting switches as shown below each time you
press the button.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (` RANDOM) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting switches as shown below each time you
press the button.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥When [MODE] is pressed, the sound will be interrupt-
ed for an instant. This is normal and not indicative of a
malfunction.
≥The mode is canceled when you disconnect the power
source.
Main unit
Main unit
Remote control
Remote control
Main unit
Main unit
Remote control
Remote control
Main unit
Main unit
Remote control
Remote control
Main unit
Main unit
Remote control
Remote control
H
EQ
MODE
MEMORY
(Beep Beep)(Beep Beep Beep)
(Beep)
(Beep Beep)(Beep Beep Beep)
(Beep)
(Beep)
(Beep)
Remote control only
Remote control only
Changing the sound quality
Press during play or stop mode.
The setting switches as shown below each time you
press the button.
S-XBS>TRAIN>LIVE>Cancel (no indicator is shown)
^ -------------------------------------------------------------}
S-XBS:
Select this setting to boost the low frequency range re-
sponse.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your stereo earphones while riding on
the train, or to reduce fatigue when listening for a long
period of time.
LIVE:
Select this setting for a live concert effect.
Note!
The setting returns to S-XBS when you disconnect the
power source.
G
EQ
MODE
MEMORY
(Beep)
Remote control only
Remote control only
Using the unit with an audio
system
≥Turn off this unit and the other equipment before con-
nection.
≥To check the display connect the remote control to the
headphone jack.
1 Connect the remote control to [Ë] on the unit.
2 Connect the stereo connection cable to the re-
mote control and the other equipment.
Do not connect the cable to the PHONO jacks on the
amplifier.
3 Turn the operation tones off (see page 5) so they
are not heard when you press buttons on the re-
mote control.
4 Set the volume to 10.
Make further volume adjustments with the other
equipment.
Note!
Obtain the optional connecting cable if the other equip-
ment comes with mini-phone jacks.
Using the unit with a car audio system
Use only the specified car stereo cassette adaptor
and car adaptor. Using other adaptors can cause
overheating which can lead to fire.
The part numbers are indicated in parentheses.
Items to be purchased
For connection to the car audio system:
≥Car stereo cassette adaptor (SH-CDM10A)
For connection to the power supply:
≥Car adaptor (SH-CDC9)
Note!
≥When you switch off the car, volume and sound quality may re-
turn to the original settings and the resume function may work
even if you change the disc.
≥It may not be possible to use the unit with some types of car
stereos owing to restrictions imposed by the construction of the
car stereo cassette adaptor.
For further details, refer to the instructions of the part concerned.
C
H
G
V
O
L
H
O
L
D
T.MARK/EQ
MODE LIGHT/DISP
L
R
Headphone jack (Ë)
Side panel of
the unit
Other equipment
(White)
(Red)
Stereo connection cable (not included)
To CD or
AUX
terminals
Using the Unit with Optional Accessories
Remote control
Connect the car stereo cassette adaptor to the
earphone jack of the remote control and connect
it to the unit’s headphone jack. Set this unit’s
volume to 10.