Filter
Top Products
5
RQT6154
Unit Remote control Display/referenceOperation
To pause play
To stop play
To turn off the
unit
Skipping
tracks
Searching
through tracks
Off mode
Stop mode
≥During program play (page 6), these buttons are
used to skip forward or backward through the pro-
grammed sequence of tracks.
≥You cannot skip to tracks that have been played in
random or random repeat play (page 6).
≥During program play, random play, random repeat
play or 1-track repeat play (page 6), search opera-
tion is limited to the current track only.
Press during play.
Press during play.
Press during stop mode.
Press during play.
(Press [
:
] twice to skip to the
beginning of the previous track.)
Press again to restart play.
Press and hold during play.
S-XBS
S-XBS
No indicator is shown
Total playing time
Backward Forward
EQ
MODE MEMORY
Press during play.
EQ
MODE MEMORY
Press and hold
during play or
stop mode.
(Beep...Beep)
(Beep...Bee...p)
You cannot pause with the remote control.
EQ
MODE MEMORY
Press during play.
(Press [
:
] twice to skip to the beginning of the
previous track.)
Press and hold during play.
Forward
(Beep Beep)
Backward
(Beep Beep Beep)
Using the remote control
∫ Operation confirmation tones
This tone sounds when a button on the remote control is
pressed. Refer to the parentheses in the illustrations for
the different types of confirmation tones.
∫ Turning the operation tone on and off
While stopped or during play
Press and hold [EQ] for 5 seconds until the display ap-
pears.
The tone sounds when the setting is changed.
∫ The display light
The light in the remote control’s display comes on for
about 5 seconds when you press a button, unless the
hold function is on.
To check the current display
Change the position of the hold switch. The light comes
on for about 5 seconds.
When using batteries
This unit includes a mechanism that extends the
life of the batteries by varying the rotation rate of
the motor. Motor noise may increase when the rate
changes.
If the noise bothers you
Use the AC adaptor to power the unit. The rotation
rate does not change while you are using the AC
adaptor.
EQ
MODE
MEMORY
S-XBS
S-XBS
To turn the tone off
To turn the tone on
Resume function
Play starts from the beginning of
the current track the next time you
press [1/
;
].
Resume function
Play starts from the beginning of the current track
the next time you press [1/∫].
The resume function remains active. The resume function remains active.
Total number of tracks
This system deals with skipping in a variety
of ways:
≥The thinner and lighter construction makes the unit
less susceptible to vibration.
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pick-
up to its original position if it is knocked off the track by
a strong shock.
≥An anti-skip memory (max.48 seconds) fills in interrup-
tions caused by bumps and vibrations.
The anti-skip system works automatically while the
system is on and cannot be canceled.
When bumps continue repeatedly
The elapsed playing time disappears and sound is inter-
rupted.
Note!
≥The anti-skip memory compresses digital signals.
≥While the system is on, the disc rotates at a higher
rate than usual in collecting extra audio data. This
could result in a slight increase in disc rotation noise.
S-XBS
Anti-Skip System