Filter
Top Products
6
1/∫
$
MEMO/
%
DISP
Play
Confirm tracks
1/∫
Press during play.
(“M”disappears.)
Press during play.
Cancel
Press after all desired tracks
have been programmed.
While stopped, use [:] or [9] to select the track,
then press [
$
MEMO/
%
DISP].
While stopped, each time you press and hold [
$
MEMO/
%
DISP]
≥You cannot change the memory time for MP3. It is a maximum of
400 seconds for MP3 recorded at 128 kbps.
Anti-skip enhanced mode,
180-second anti-skip memory
Sound enhanced mode,
45-second anti-skip memory
Track number
Sequence number
Repeat to program up to 20 tracks.
Sequence number
Track number
Album number
POS 1
POS 2
≥“
~
” is displayed in place of anything over 32 characters.
≥“_” is displayed in place of characters this unit cannot
display.
≥“ ” appears if ID3 tags haven’t been entered.
Each time you press and hold
[
$
MEMO/
%
DISP] during
play
Track
title
ID3
artist
name
ID3
track
title
Track number
and elapsed
play time
You can regenerate signal frequency lost during compression,
restoring the sound to near pre-compression form.
While stopped, each time you press and hold
[
$
MEMO/
%
DISP]
RM ON
Sound enhanced
RM OFF
Conserves battery life
$
MEMO/
%
DISP
button
Album
title
3
M
01
Will appear after
[
$
MEMO/
%
DISP]
is
pressed
01
M
ALBUM
1
3
M
The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates
skipping caused by vibration. You can change the anti-skip memory time.
(Id3 )
(Id3 )
Program play (Desired tracks only )
Display changes
Anti-skip mode
Digital Re-master (Enjoy more natural sound)
MP3
RQT7719
MP3
MP3
CD-DA
MODE button
∫Specifying the AB segment
Press [
$
MEMO/
%
DISP] at the start point (A) and once more at the end point (B).
≥Stop or skip (
➪
page 5) to cancel.
≥If you do not specify point B this will automatically be set as the end of the
disc. Repeat begins when this point is reached. You can specify point B
again by pressing [
$
MEMO/
%
DISP].
`
`
RND
RND
A
1
`
B
`
Each time you press [MODE]
One track
repeat
All track
repeat
Random
Random
repeat
No display (canceled)
During play
While paused
or
AB repeat
(
➪
below)
Each time you press and hold [MODE]
No display
(canceled)
Album mode
Using the Remote Control
Play modes
Album mode (Play only the tracks in a selected album)
MP3
Each time you press and hold [EQ]
Each time you press [EQ], while displayed
Boosts
the bass
Reduces sound
leaks and
listening fatigue
≥The effect may differ with different kinds of music.
≥Depending on the recording conditions, sound may be interrupted
when switching between EQ settings.
≥
If you select 3D-1 or 3D-2 then try playing a disc that contains both CD-ROM
format and CD-DA format tracks, there will be a brief noise when the disc
changes from playing the CD-ROM format track to the CD-DA format one.
≥If you select 3D-1 or 3D-2, increasing the unit’s volume beyond 19
will not increase the volume output.
[“EQ” disappears from the display (canceled)]
Enhanced
S-XBS
Tone off
Tone on
BP ON
BP OFF
Sound
field of
3D
Enhanced
3D-1
EQ button
When the display is difficult to see
(On the main unit)
Set the main unit to HOLD while stopped. While pressing and
holding [1/;], press [r] (darker) or [s] (lighter).
To see the display in the dark
Each time you change the position of the hold switch on the
remote control, the display will light for around 5 seconds.
Sound quality
Remote control operation tone
3D-1
3D-1 3D-2
S-XBS
S-XBSr
TRAIN
EQ OFF
≥To select another album (
➪
page 5, Album skip)
≥You cannot turn album mode on during program play (
➪
below).
≥You cannot select “RND” and “A
`
B” while playing MP3.
CD-DA