Filter
Top Products
Skip play
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
1 Select the desired track.
2
Changing the sound quality
Press during play or stop mode.
The setting switches in the sequence indicated below
each time [EQ] is pressed.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
Select this setting to boost the low frequency response.
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones/earphones while rid-
ing on the train, or to reduce fatigue when listening for a
long period of time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
4
Other Play Methods
The letters such as D in the various illustrations refer to the descriptions in the “Location of Controls” section.
Repeat play/Random play
Press during play or stop mode.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)(----------------]
One track is repeated. |
v|
All-track repeat (`) |
All the tracks on the disc are repeated. |
v |
Random (RANDOM) |
The tracks play once each in random |
order and then play stops. |
v |
Random repeat (RANDOM `) |
The tracks play repeatedly in random |
order. |
v |
Cancel (no indicator is shown)
--------------}
When pressed during program play
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1
`
M)(------------]
One track is repeated. |
v|
Memory repeat (
`
M) |
The programmed tracks are repeated. |
v |
Cancel (
M) -------------------------------------------}
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The resume function does not work when random or
random repeat are on.
≥The mode is canceled when you disconnect the power
source.
D
C
Location of Controls
Portable CD player A
A Stop/operation off button
(∫)
B Display
C Play/pause button (1/;)
D Skip/search buttons
(:, 9)
E Headphone volume control
buttons (j, VOL, i)
F Mode button (MODE)
G Memory/recall button
(MEMORY, RECALL)
H EQ button (EQ)
I Open switch (OPEN1)
J Handstrap hole
K DC IN jack (
K
DC IN 4.5 V)
L Hold switch (HOLD)
M Headphone jack (Ë)
N Hole for car mounting base
Wired remote control B
A Skip/search buttons
(:, 9)
B Play/stop/operation off button
(∫/1)
C Volume control buttons
(j,VOL,i)
D Headphone jack/ earphone
jack
E Clip
F Hold switch (HOLD)
G EQ button (EQ)
H Plug
A
B
V
O
L
M
E
M
O
R
Y
R
E
C
A
L
L
EQ
M
O
D
E
O
P
E
N
H
O
L
D
Ë
I
H
EQ
HOLD
VOL
A
BC
F
G
D
E
HOLD
Ë
D
C
I
N
4
.
5
V
KL M
B
A
CED
F
G
H
J
N
Side panel of the unit
F
MODE
H
EQ
Program play
Up to 24 tracks can be entered in the programmed se-
quence.
Preparation: Put unit in stop mode.
1 Select the desired track.
2 Register in sequence.
(The indication “M” and the programmed se-
quence appear on the display.)
3 Repeat steps 1 and 2 to program all
the desired tracks.
4
∫ To program the same track in the se-
quence more than once
∫ After step 2, press [MEMORY, RECALL] the desired
number of times.
∫ If “'” is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY, RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
∫ To delete the entire programmed se-
quence
∫ Press [∫].
Note!
The repeat and random play modes are canceled after
steps 1 and 2.
D
G
MEMORY
RECALL
C
Back panel of the unit