Filter
Top Products
7
RQTC0115
∫ Enjoying multi-channel surround sound
≥You cannot use DTS Digital Surround decoders not suited to DVD.
∫ Connect the AC power supply cord last
Conserving power
This unit consumes a small amount of power even when it is turned off (1 W). To save
power when the unit is not to be used for a long time, unplug it from the household AC
outlet.
Change “PCM OUTPUT”, “DOLBY DIGITAL” and “DTS” (➜ 17, “AUDIO” menu).
COAXIAL IN
Amplifier with a built-in
decoder or a decoder-
amplifier combination
Coaxial cable
Back of the unit
AC power supply cord
To household AC outlet (AC 120 V, 60 Hz)
STEP 2 The remote control
Preparation
Turn on the television and select the appropriate video input on the television.
1 Press [Í].
2 Press [SETUP].
QUICK SETUP screen appears.
3 Follow the on-screen instructions and select the settings with [3 4]
and [ENTER].
≥Press [RETURN] to return to previous screen.
4 Press [ENTER] to finish setting.
5 Press [SETUP] to exit the setup menu.
≥To change these settings later, select “QUICK SETUP” (➜ 17, “OTHERS” menu).
∫ Batteries
≥Insert so the poles (i and j) match those in the
remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese
batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the
fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store
in a cool, dark place.
∫ Use
Aim at the remote control sensor (➜ 8), avoiding obstacles, at a maximum range of
7 m (23 feet) directly in front of the unit.
STEP 3 Quick setup
R6/LR6, AA
STEP 1
Connection
/
STEP 2
The remote control
/
STEP 3
Quick setup
RQTC_0115_Y.fm Page 7 Wednesday, December 27, 2006 11:46 AM