Filter
Top Products
- 17 -
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,
CLUB). You can customize your settings for these and save
them for instant recall.
SQ Changeover
Press [SQ] to activate the SQ selection mode.
Press [SQ] to select the sound type as follows.
Press [DISP] to return to the regular mode.
Notes:
• After pressing [SQ] on the main unit, you can also select a
sound type by pressing the preset buttons [1] to [6].
• Please refer to “Audio Settings” for the adjustment to each
speaker.
SQ Selection Based on Genre
SQ (Sound Quality)
SQ Adjustment
You can adjust the characteristics of the currently selected
sound type (SQ). (
« Above)
It is also possible to preset up to 5 different adjusted SQs.
SQ3 (3-Band Sound Quality)
Center frequency and level are adjustable in each of 3 bands.
This lets you fi ne-tune sound quality for each genre to suit
car-interior acoustics and your personal preferences.
Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)
SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
• The bass/treble control level of each frequency is fi xed to the
frequency that has been selected for SQ.
To return an adjusted SQ to the default setting
Press [SQ], and select the SQ which is to be returned to
the default setting. (Only for main unit)
Hold down [BAND] for 2 sec. or more.
Notes:
• You cannot save any SQ presetting value in [1] button.
• Any SQ adjustments will not change the call up screen
names such as ROCK and JAZZ.
• Do not activate SQ and Bass/Treble at the same time to avoid
causing sound distortion.
Sound Control
(FLAT) fl at frequency response:
does not emphasize any part. (Default)
(ROCK) speedy and heavy sound:
exaggerates bass and treble.
(POP) wide-ranged and deep sound:
slightly emphasizes bass and treble.
(VOCAL) clear sound:
emphasizes middle tone and slightly emphasizes treble.
(JAZZ) jazz-specifi c deep sound:
sound with emphasis on sharpness of high-hat and echo
saxophone.
(CLUB) club and disco-specifi c sound:
reproduction of realism being in a club.
1
Press [VOL] (PUSH SEL:
Select) to open the audio menu.
2
Press [VOL] (PUSH SEL: Select) to select
SQ SET.
3
Adjust each band.
/: center frequency up/down
[][]: Band selection
[][]: Level up/down
Level
Frequency
4
Hold down the numeric button [2] to [6] for
2 sec. or more.
• The adjusted SQ is preset in the number of the selected
button, and return to the regular mode resumes.
• When you suspend the SQ preset adjustment, each level
remains your recent adjustment until a new SQ presetting
operation is performed or you call up the SQ preset.