Filter
Top Products
CQ-C700U
Radio
English
21
Up to 6 stations can be preset in AM, FM1, FM2, and FM3
respectively.
Preset stations can be simply called up by pressing [}]
(P-SET) or [{] (P-SET).
Notes:
¡Direct selection can be executed with [1] to [6] but-
tons on remote control.
¡You can switch between 6 and 18 for FM presetting
stations. (EACH BAND/ALL BAND)
¡Preset stations are changeable. (Preset Swap)
Auto Preset Memory (APM)
Stations with good receiving conditions automatically
preset.
1
Select a band.
2
Hold down
[BAND] (APM)
for 2 sec. or
more.
The preset stations under best receiving conditions
are received for 5 sec. each after presetting the sta-
tions (SCAN). To stop scanning, press
[}] or [{].
Note: New stations overwrite existing saved stations.
Manual station preset
1
Tune in to a station.
2
Hold down [}] or [{] for 2 sec. or
more.
3
Turn [VOL] to select a preset number.
4
Hold down [PUSH SEL] for 2 sec. or
more, and the frequency is stored at the
selected preset number.
Notes:
¡In step 2, a station can be registered by holding down
the numeric button
[1] to [6] for 2 sec. or more.
¡
To stop presetting stations, press
[DISP]
(DISPLAY).
¡The operation above allows users to replace the cur-
rent station with the station preset in the selected
number while selecting a preset station. (Preset Swap)
CQ-C700U
Radio Menu Display
1
Press [MENU] to display the menu dis-
play.
For using the remote
control, hold down
[SEL] (MENU) for 2
sec. or more.
2
Press [PUSH SEL] to adjust.
For using the remote
control, use
[BAND]
(SET).
3
Press [MENU] to close the menu
screen.
For using the remote control, hold down [SEL]
(MENU)
for 2 sec. or more.
PRESET
Preset range for FM bands
: Individual setting for FM1-3 each
(default)
: Setting of FM1-3 together
Station Preset
(APM: AUTO PRESET MEMORY, P·SET: PRESET)