Filter
Top Products
- 20 -
TV Function
Use the / (CH+/CH-) buttons to select the item you want to set.
Use the / (VOL+/VOL-) buttons to select the item and enter it.
First use the / (CH+/CH-) buttons to highlight TV SETUP, and press the
button to exit from the TV SETUP menu and press the button to return to the
PICTURE setup menu.
System
Use the / (VOL+/VOL-) buttons to select type of TV system. The default system
is PAL B/G.
Channel
Use the / (CH+/CH-) buttons to change the channel.
Skip
When the button is pressed to turn the function ON, it will skip the current channel
when using / (CH+/CH-) to select channels.
When the button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Swap
Use the / (CH+/CH-) buttons to select SWAP, press the number buttons on the
remote control to input the current number, the the channel will be swapped to
selected channel.
Blue Screen
This function is only available under no signal input mode.
Use the button to turn the function ON, use the button to turn the function OFF
TV SETUP
SYSTEM
CHANNEL
SKIP
SWAP
BLUE SCREEN
FINE TUNING
AUTO MEMORY
PICTURE EXIT
TV System Setup
When the button is pressed, the TV system setup menu will appear as below:
PAL B/G
001
OFF
_ _ _
OFF