¡Repeat setting will be cleared when
moving to another title, chapter or
track.
¡Repeat playback are not available with
all discs or during repeat A-B play-
back.
¡To exit the sequence, press the A-B
button.
¡To cancel Point A, press the CLEAR
button.
¡This function does not work in the
other repeat modes.
At your desired starting point (A)
Notes
¡Press the CLEAR button at step [2] to
erase the most recently entered track.
¡To erase all programmed tracks at
once, select “ALL CLEAR’’ and press
the ENTER button at step [2].
¡While a program is being played back,
the STOP button works as follows;
⇒
Press the STOP button and the
PLAY button next, so that the pro-
grammed playback restarts. (CD
playback restarts from the current
point.)
⇒
Press the STOP button twice and
the PLAY button next, so that play-
back restarts from the first track in
the original order. However, your
programmed playback can be
restarted when you follow the
above steps. (Your program is still
stored until either the disc tray is
open or power is turned off.)
¡To repeat the current track in the pro-
gram, press the REPEAT button
repeatedly until “ TRACK’’appears
during playback.
¡To repeat the entire program press
the REPEAT button repeatedly until
“ ALL’’ appears during playback.
You may determine the order in which
tracks will play.
Up to 99 tracks can be
ordered
Note
¡If you want to repeat the current track
in the random selections, press the
REPEAT button repeatedly until
“ TRACK” appears during play-
back. If you want to repeat the entire
random selections, press the
REPEAT button repeatedly until
“ ALL” appears during playback.
