Filter
Top Products
- 9 -
System Setting
System parameters can be set here and every option varies according to firmware upgrading
At the menu, press > to select the “Setup”:
Press M button to System Setting interface is as follows:
z Parameters Introduction
Clock (Date &
time)
set the date and time when recorded files are saved
LCD set
set the period of time (second) when Backlight stays on without any
operation
Language Set different language displayed
Power off Set a fixed time after which the player may turn power off automatically
Replay mode Set working states on Replay mode
Online device MTP and USB Disk setting
Online Mode an option specially designed for “Private Space” function
Memory info. Show memory capacity and percentage that has been used
Firmware Version show firmware version
Firmware
Upgrade
special for firmware upgrading
DRM time Greenwich Mean TIME
Remove MTP
info
Exit MTP mode
Exit Exit from current interface
z Instruction
○ “Date & time” set
1. System Setting Interface
2. Press M to enter Record Time Interface.
3. Press V to set time in sequence of
“YY-MM-DD”
4. Push < / > button to adjust numbers
5. Press M to confirm and exit.
○ “LCD set” setting
Operating steps is as follows:
1．At System Setting interface,
2. Press > key to select “LCD set” option,