Sylvania SCR2608 Clock Radio User Manual


 
FULL LCD DISPLAY
UNIT POWER SUPPLY ( Mains 120V/60Hz)
Connect the power cable plug to the (120V) wall outlet.
Warning:
Before using the unit. Check that the local mains supply is compatible with the HI-FI System (120V 60Hz)
Do not plug or unplug the power cable when your hands wet.
When planning not to use this unit for long periods of time (i.e Vacation etc.) disconnect the plug from the wall
outlet.
When disconnecting the power cord from the wall outlet, grasp the plug; do not pull the cord in order to avoid
shock risks caused by the damaged cable.
Battery Safety Precautions:
Keep batteries away from children and pets.
Do not use rechargeable batteries with this product.
Insert the battery observing the proper polarity (+/-). Failure to properly align the battery polarity can
cause personal injury and/or property damage.
Remove spent or discharged batteries from the product. Remove the battery when the product will not
be used for extended periods of time to prevent damage due to rusted or corroded batteries
Never throw batteries into a fire, Do not expose batteries to fire or other heat sources
Battery Disposal: Spent or discharged batteries must be properly disposed of and recycled in
compliance with all applicable laws. For detailed information, contact your local country solid waste
authority
Follow the battery manufacturer’s safety, usage, and disposal instructions.
Battery Backup:
One DC 9V batteries (not included) may be installed as a backup option to maintain the time if electrical
power fails. In the event of a power outage, the time will not appear on the clock LCD Display, however
the clock will continue to operate and the actual time will be maintained. The Clock LCD Display and
other functions will resume once electrical power is restored if used the backup battery; Remove the
battery if the clock is not used or stored for long periods of time