Filter
Top Products
44
Customizing the Function Settings
Angle Mark
The Angle Mark can be set On or Off. It must be set to
On to enable you to view the different camera angles if
the DVD has this feature. On is the default setting.
On Screen Display Language (OSD Lang)
The on screen display language can be set to any of
four options shown below.Once a language is selected
the menus will immediately change to that language.
SPDIF Setup
The Sony Philips Digital Interface options are Off, Raw
or PCM.
Raw
Raw is an uncompressed digital bitstream, which is
processed sequentially. The Dolby Digital Audio
contained on the disc, is passed directly to the amplifier
through the digital coaxial output, without the need for
decoding. This is the default setting.
PCM
PCM (Pulse Code Modulation) is an uncompressed
43
• Normal/PS
• Normal/LB
• Wide
Select the most appropriate aspect ratio for the DVD
being viewed.
1. Normal/PS
Normal Pan and Scan is used for most normal television
broadcasts. It has an aspect ratio of 4:3. If you select
this setting when viewing a DVD the picture will fill the
screen but, you will not see the left and right edges of
the picture.
2. Normal/LB
Normal Letter Box will show the DVD in its original
aspect ratio so depending on the size of your television
screen, you may see black borders above and below the
picture.
3. Wide
Choose this setting if you have a widescreen television.
This is the default setting.
Customizing the Function Settings