Filter
Top Products
14
If you connected an external power
source, the CD player’s buttons light
until you stop the CD and turn the CD
player off, or the CD player turns itself
off automatically.
To temporarily stop play, press
PLAY/
PAUSE
. flashes. To resume
play, press
PLAY/PAUSE
again.
When the last track finishes playing,
the CD stops and the display alter-
nately shows the total number of
tracks and total playing time of the CD
for about 2 minutes, then the CD play-
er automatically turns off. To turn it off
sooner, press
STOP/CLEAR
.
DIGITAL ANTI-SHOCK
SYSTEM (DAS
2
)
Your CD player contains special cir-
cuits to overcome sound skipping
problems caused by shock or vibra-
tion. This means you can carry the CD
player anywhere you go or use it in
your vehicle. When you turn on the
anti-shock system, the CD player con-
tinuously saves 3 seconds (42-5075)
or 10 seconds (42-5076) of music in
memory. During a shock or vibration
that would normally make a track skip
or pause, the CD player plays directly
from memory.
To turn on the anti-shock system, set
DAS OUT/IN
to
IN
. If the CD player is
playing a CD, the sound briefly stops,
then appears on the display
and the sound continues.
AUTOMATIC SEARCH
MUSIC SYSTEM (ASMS)
You can use ASMS before or during
regular or programmed play (see “Pro-
grammed Play” on Page 17) to quickly
locate any track on a CD.
While the CD is stopped, repeatedly
press
or to move backward
or forward to the desired track. Press
PLAY/PAUSE
to play the track.
During play, press to return to
the beginning of the current track.
Press twice to return to the be-
ginning of the previous track. To move
to the beginning of the next track,
press .
Note:
The CD player consumes addi-
tional battery power when you use the
anti-shock system. When you use the
CD player in a stable location, set
DAS
OUT/IN
to
OUT
to save battery power.
42-5075.fm Page 14 Thursday, August 12, 1999 1:03 PM