Filter
Top Products
19
Specifications
DS6.7
Driver Compliment
High Output injection molded graphite
reinforced polypropylene woofer with
shorting ring and butyl rubber surround
in an integrated patent-pending pivoting
mount, (15° pivot angle)
1" fluid-cooled ultra-wide dispersion
tri-laminate Teteron dome tweeter in a
patent pending low diffraction pivoting
mount, (17° pivot angle)
Recommended Amplifier Power
10 to 150 watts per channel
Tone Controls
Bass jumper: flat, -1dB and -2dB
Baffle-mounted Treble controls:
-1.5dB, flat and +1.5dB
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
48Hz to 22kHz, +/- 3dB (on axis)
Sensitivity
89dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
9-7/8" diameter
Depth Behind Wall
6" deep (based on 1/2" drywall)
Hole Cut-Out Dimensions
8-5/8" diameter
Wiring Requirements
Patented two-piece, no strip speaker
wire terminal, accommodates 12–18
gauge wire. We recommend 16–18 gauge
stranded wire for up to 80 feet, 14 gauge
stranded wire for up to 200 feet.drywall)
Specifications