Filter
Top Products
18
Specifications
Specifications
DS6.3
Driver Compliment
Injection molded polypropylene woofer
with butyl rubber surround in an inte-
grated patent-pending pivoting mount,
(15° pivot angle)
1" fluid-cooled ultra-wide dispersion silk
dome tweeter in a patent-pending low dif-
fraction pivoting mount, (17° pivot angle)
Recommended Amplifier Power
10 to 100 watts per channel
Tone Controls
Bass jumper: flat, -1dB and -2dB
Baffle-mounted Treble controls:
-1.5dB, flat and +1.5dB
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
50Hz to 20kHz, +/- 3dB (on axis)
Sensitivity
87.5dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
9-7/8" diameter
Depth Behind Wall
6" deep (based on 1/2" drywall)
Hole Cut-Out Dimensions
8-5/8" diameter
Wiring Requirements
Patented two-piece, no strip speaker
wire terminal, accommodates 12–18
gauge wire. We recommend 16–18 gauge
stranded wire for up to 80 feet, 14 gauge
stranded wire for up to 200 feet.
DS6.5
Driver Compliment
Injection molded graphite reinforced
polypropylene woofer with butyl rubber
surround in an integrated patent pending
pivoting mount, (15° pivot angle)
1" fluid-cooled ultra-wide dispersion
tri-laminate Teteron dome tweeter in a
patent pending low diffraction pivoting
mount, (17° pivot angle)
Recommended Amplifier Power
10 to 150 watts per channel
Tone Controls
Bass jumper: flat, -1dB and -2dB
Baffle-mounted Treble controls:
-1.5dB, flat and +1.5dB
Nominal Impedance
4 or 8 ohm selectable
Frequency Response
50Hz to 22kHz, +/- 3dB (on axis)
Sensitivity
88dB for 2.83 volts of Pink Noise
Overall Exterior Frame Dimensions
9-7/8" diameter
Depth Behind Wall
6" deep (based on 1/2" drywall)
Hole Cut-Out Dimensions
8-5/8" diameter
Wiring Requirements
Patented two-piece, no strip speaker
wire terminal, accommodates 12–18
gauge wire. We recommend 16–18 gauge
stranded wire for up to 80 feet, 14 gauge
stranded wire for up to 200 feet.