Filter
Top Products
L
R
XLR
USB
COA-
OPT-
DIGITAL INDIGITAL IN
R L
~230V
~115V
VOLTAGE SELECTORVOLTAGE SELECTOR
Designed and developed in the USA
MODEL:
SERIAL NO.:
AC INAC
IN
AUDIO OUTAUDIO OUT
XLR XLRRCA
dac25.3dac25.3
T1AL/~250V
4
A Few Precautions
Please read this manual carefully. In addition to installation and operating
instructions, it provides valuable information that will help you get optimum
performance from your system. Please contact your authorized music hall dealer
for answers to your questions. In addition, all of us at music hall welcome your
questions and comments. Save the shipping carton and all enclosed packing
material for future use. Shipping or moving the unit in anything other than the
original packing material may result in severe damage that is not covered by the
warranty. Be sure to keep the original sales receipt. It is your best record of the
date of purchase, which you will need in the event warranty service is required.
Placement
Digital In - Connecting Source Components to the dac25.3
The dac25.3 has 4 digital inputs: coax (s/pdif), optical, USB, and XLR.
Use common sense when placing the dac25.3. Always place it on a firm, level
surface. Make sure that the shelf or cabinet can support the weight. Ensure that
there is adequate ventilation around all sides of the unit. Avoid placing the
dac25.3 where it may be subject to excessive heat, such as near a heat register.
Do not place anything on top of it. For best performance, avoid placing the
dac25.3 where it may be subject to vibration, such as near a speaker.
Connect your source components to the appropriate inputs on the back of the
dac25.3. You can connect one or all four inputs at the same time. Choose
between the inputs using the selector button on the front panel.input