Filter
Top Products
5
Digital Out COAXIAL OUT
S/PDIF output for use with other digital components. This output converts the
USB and OPTICAL (toslink) input signal to an S/PDIF output.
Using the dac15.2
power - on/off
Turn on the dac15.2. If no digital input is active the locked light will not light.
input
Use the input switch to select desired input. Enjoy.
on
off
usb
coaxial
optical
power locked
dac15.2 digitalto analog converterdac15.2 digital to analogconverter
Troubleshooting
If no sound comes out of the system with the dac15.2 connected, there are
several areas to check. Either you are not getting an audio signal to your
preamplifier, or you don't have a good digital source feeding the dac15.2.
First, check to make sure your preamplifier, integrated amp, or receiver is
switched to the input that the dac15.2 is connected to. Test the connection and
the cables to make sure. Keeping the input selected and using the same cable,
connect this input to a known good source like a tuner or the analog output of a
CD player. If that works, then it is most likely not a connection problem between
the dac15.2 and the preamp, integrated amp, or receiver.
The next step is to check and see if the digital input is properly connected. Look
on the front panel of the dac15.2 to see if the locked light is illuminated. If it is
not, this is most likely the problem. Switch the selector to another input to
see if one locks. If one does not lock, you either have a bad digital cable or you
aren't getting a good digital signal. Try replacing the digital cable on the input
you've selected. For instance, if you are using a coax connection try replacing the
coax cable with another coax cable. If this doesn't work, try selecting a different
input (optical for instance) and try using the CD player's optical output with an
optical cable instead.
input