Filter
Top Products
8
Last station memory function
The frequency of the last station tuned to before switching off the unit will be stored
in the memory. When the unit is switched on again, it will receive this station in the
respective waveband. When changing the waveband, the last station tuned to in
each waveband will also be stored in the memory.
Setting the sleep function
• Repeatedly press POWER / SLEEP twice for 2 seconds, until the sleep icon
and sleep time 10 appears. The radio turns on.
• To increase the sleep time, repeatedly press the POWER / SLEEP button, each
time you press POWER / SLEEP, the sleep time is increased by 10 minutes.
(The minimum sleep time you can have is 10 minutes; the maximum sleep time
you can have is 90 minutes).
Notes: If you don’t press any key for 15 seconds, the sleep timer is stored
automatically and returns to the original display. It will not display the SLEEP time.
If the clock reaches a preset alarm time while the sleep timer is counting down, the
alarm cancels the balance of the sleep timer setting.
When the sleep time has elapsed, the radio will turn off automatically.
Cancel sleep by pressing SNOOZE or POWER / SLEEP.
Setting the timer
1 Press the TIMER button then preset timer 20 and - 00 appears.
2 Press the UP or DOWN buttons to change the timer duration up to 99 minutes.
Repeatedly press UP or DOWN buttons to change timer duration by 1 minute.
Hold down the UP or DOWN buttons to change the timer fast.
Note: If you don’t press any key within 2 seconds, the unit stores the timer
setting automatically. It shows the running count down time.