Filter
Top Products
Battery back-up facility (battery not included)
Unit will work without a battery being fitted
Your clock radio is equipped with a battery back-up facility.
1 Remove the battery compartment cover (underneath the unit) by
pushing in the clip and lifting off.
2 Insert a battery size 9 volts PP3/6LR61 (Ensure battery is inserted correctly).
3 Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run, however, time
keeping will not be accurate. The time will be displayed but the backlight will be
extinguished to conserve battery life. The memory will retain details of the clock time
and alarm settings.
If the optional battery is not installed in case of the AC power failure the clock will
start working at 12:00 when power is restored. You will need to reset the clock and
alarm settings.
Battery back-up is designed to operate for a short period only.
If the unit is not to be used for a prolonged period, remove the battery to
avoid battery leakage.
In the interests of environmental safety : dispose of batteries safely.
Auto dimmer sensor
The unit has an automatic dimmer sensor. The clock display will dim automatically
depending upon the darkness.
Switching on and setting the clock time
Before any alarm functions can be used, you must set the clock to the correct time.
1 Place the unit on a flat surface. Plug the mains plug into the socket and switch on
at the wall socket.
2 The LCD clock display will light up.
4