Filter
Top Products
7
Operation
Using the Radio
1 Press the radio on/off button.
2 Slide MW/FM waveband switch to the desired band.
3 Rotate tuning control to the desired station.
To obtain the maximum reception fully extend the wire FM aerial which is
located at the rear of the unit and alter the direction of the wire for best results.
The aerial for the MW waveband is located inside the unit. To obtain, the
maximum MW reception rotate your clock radio.
4 Rotate volume control to the desired sound level.
Using the alarms
Setting the alarms
You can set two independent alarms to (buzzer or radio) each day of the week Monday
to Sunday or from Monday to Friday.
1 Press the ALARM ON/OFF button, AL1 appears on the display. Press again for
AL2 and press again for current time.
2 Press UP or DOWN button to change the alarm time setting in 1 minute
increments, or hold down UP or DOWN to change the time in 10 minute
increments.
3 Repeatedly press SLEEP button to set alarm mode:
radio or buzzer. If neither
or appear the alarm mode is OFF. To wake to the alarm sound, set to . To
wake to the radio set to
.
4 Press DAILY / WEEKDAY / SNOOZE button to have the alarm work either Monday
through to Sunday (daily) and press again for Monday through Friday (weekday).
Either Su Mo Tu We Th Fr Sa or Mo Tu We Th Fr will appear at the top of the
display to confirm your selection.
5 Repeatedly press ALARM ON/OFF until the normal time display appears or wait
for 15 seconds. The clock stores the setting and resumes normal operation.