Filter
Top Products
3
Electrical requirements
Check that the voltage on the rating plate of your AC/DC adaptor corresponds
with your house electricity supply which must be A.C. (alternating current).
Power supply
Connecting AC/DC adaptor (supplied).
Plug the mains adaptor into a socket and plug the jack into the side of the unit.
As soon as you connect AC/DC adaptor or batteries the clock will start working at
12:00. You will need to set the correct time.
Installing batteries (not supplied)
1 Remove the battery compartment cover (located underneath the unit) by
pushing in the clip and lifting off.
2 Insert 4 x AA batteries and connect to terminals (Ensure batteries are inserted
correctly).
3 Replace the battery compartment cover.
Battery low indicator
The unit checks the battery voltage capacity when the AC/DC adapter is not in use.
The low battery icon will appear on the bottom of the LCD display when the unit is
checking for a low battery. This symbol will also appear when a power cut happens.
The AC/DC adaptor, when fitted, overides the batteries.
Note: In order to avoid losing alarm settings, turn off the radio before replacing the
batteries. Replacing the batteries must be within 30 seconds, otherwise the memory
and alarm settings will be erased.
If the unit is not to be used for a prolonged period, remove the batteries to avoid
battery leakage.
In the interests of environmental safety : dispose of batteries safely.