Filter
Top Products
12
Setting up the DSP33 Digital Loudspeaker System
To obtain the best sound
For best results adjust the position of the loudspeakers while
listening to music.
If possible, have the most acoustically absorbent wall in the
room behind the front speakers. Ideally have each DSP33 at
least 0.5m (20") from a corner.
If the speakers are mounted on stands, position them
approximately 0.25m (12") from the wall.
If you are using the speaker as a centre channel, place the
speaker centrally between the main left-right pair and, if
possible, arrange for the tweeters of the three speakers to be
approximately the same height. The plinth allows the centre
channel to tilt towards the listener for optimum imaging.
To wall mount the digital
loudspeakers
The DSP33 has been designed to be secured with an
OmniMount 75 Series wall bracket, details of which may be
obtained from OmniMount Systems, USA (818-766-9000). The
mounting bolts are shown on the back panel. These are M6
Allen Bolts. Do not use any other bolt for the OmniMount
bracket. Please follow the instructions for fitting provided with
the bracket. It is entirely the responsibility of the installer to
ensure that the DSP33 is securely fastened.
No other bolts should be undone on the rear panel.
Caution: The DSP33 is heavy for its size.