Filter
Top Products
3
PREPARATION FOR USE
AC OPERATION
Unwind the AC cord and extend it to its full length. Insert the small end of the AC cord into the AC power
jack on the rear of the unit. Insert the other end of the AC cord into any convenient 120V 60Hz household
outlet.
Please note that this unit is equipped with a polarized AC
plug which has one blade wider than the other. This is a
safety feature to reduce the likelihood of electric shock. This
polarized AC plug will only fit in a polarized AC outlet. If you
find that you cannot insert this plug into your outlet, you
may have an obsolete non-polarized outlet. Please do not
try to defeat this safety feature by using a non-polarized
adapter or by filing the wider blade to make it fit into your
outlet. If this plug does not fit into your outlet, you should contact a qualified licensed electrician to replace
your obsolete outlet.
SPEAKER CONNECTION
1. Place the speakers in convenient locations on either side of the unit.
Usually a distance of five to eight feet between speakers provides
the best stereo effect, but this may vary depending on the size and
acoustics of the room.
2. Locate the Speaker Terminals on the rear of the unit and connect the
red wires to the red (+) terminals and connect the black wires to the
black (–) terminals.
3. To connect the speakers, press the terminal down, insert the speaker wire and press the terminal back to
the lock position.
CAUTION: Only connect the speakers which are supplied with the unit. The use of any other or additional
speakers may cause damage to the unit. Never operate the unit without the speakers connected.
HEADPHONES
To listen to the unit through headphones, simply insert the headphones (not included) into the Headphones
jack. The speakers will be disconnected when the headphones are plugged in.
UNIT
R
L
+
Red
Black
MX4302.O/M.QXD 3/4/03 7:47 AM Page 3