Filter
Top Products
7
INSTALLATION (CONTINUED)
SPEAKER CONNECTION
1. The right speaker cannot be removed from the unit. The left speaker can be
removed from the unit, if desired. To remove the left speaker, simply push up
on the speaker as shown in figure 1. To reinsert the speaker, line up the pins as
shown in figure 2 and push down until a click is hear.
2. Connect the left speaker to the Left Speaker jack as shown in figure 3. To extend
the speaker wire, connect the speaker plug into the extender (the side with the
hole) and the other side of the extender (with the pin) into the speaker jack (see
figure 4).
CAUTION: Only connect the speakers which are supplied with the unit. The use of
any other or additional speakers may cause damage to the unit. Never operate the
unit without the speakers connected.
Connect
to speaker
jack
Original
speaker
wire
FIGURE 1 FIGURE 2
FIGURE 3 FIGURE 4