7
Press the Stop/Eject button and
insert a microcassette tape with
the side to be played facing you.
Close the Cassette Compartment.
1
For Voice Activated Recording,
slide the VOX ON/OFF switch ❶
to the ON position and press the
Record button ❷ (the Play button
will automatically depress).
2
1
2
VOICE ACTIVATED (VOX) RECORDING
Speak into the built-in micro-
phone or insert a microphone into
the MIC jack and speak into it in a
normal tone of voice. Adjust the
VOLUME/VOX Mic Sensitivity
control until your voice activates
the recorder (REC/BATT indicator
will light).
3
NOTES:
• The first few sounds activate
the recorder and may not be
recorded.
•A variation in voice level during
recording will not stop the unit;
two seconds of silence is
required to stop the recording.
• For constant recording, see
previous page.
• When recording, the VOLUME/
VOX Mic Sensitivity control
adjusts the microphone
sensitivity. At 10, a soft sound
will activate the recorder. At 0,
a louder sound is required.
OPERATION (CONTINUED)
Voice activated recording will allow dictation only when you
speak. When the unit detects a pause of a few seconds, it will
temporarily stop recording until it detects sound again.
MB2190 O/M.QXD 3/31/03 3:07 PM Page 7