Filter
Top Products
19
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)
EXTERNAL MEMORY CARD
TO AVOID DAMAGE, make sure the unit is off before inserting or
removing the card.
1. Remove the top cover by pressing the Open button, then lifting
the top cover up to remove it as shown in Figure 1.
2. Insert a SD/MMC memory card (not included) up to 1GB, label
side facing the rear of the player, as shown in Figure 2.
3. Connect the USB cable as described previously.
4. Drag MP3 and WMA files into the SD/MMC memory card's
"Removable Disk" window.
NOTE: A WMA file with DRM will not playback if you directly drag
and drop it into the “Removable Disk” window. See page 17 for
downloading WMA files with DRM from the computer to your
player.
5. To remove the SD/MMC memory card,
turn the unit off, then
push the edge of the card and the card will spring out. Carefully
remove the card, as shown in Figure 3.
6. Replace the top cover until it snaps in place.
NOTE:
• If the external card is inserted, removed or replaced, the unit
will search the music files to update the index when the unit is
turned on again.
• If the external card is inserted, the memory card
indicator will appear at the top side of the display while
in the Music Player mode.
• While the player is on, if the SD/MMC card is removed or
inserted, “Unload the Card?” or “Load the card?” will appear in
the display. Press the Navigation control to select YES to
reload or load the SD/MMC card to update the player.
Otherwise, the SD/MMC card’s music files will not be played.
Figure 1
Figure 2
Figure 3
label
side