Filter
Top Products
9
Unpacking the Loudspeaker
To protect the fine finish of the XCS2K Loudspeaker
System during the adjustment process, it is advisable to
prepare a suitable adjustment area. A freshly vacuumed
carpeted area covered with a soft, clean fabric, such as a
large bed linen or blanket would be suitable. Start by un-
packing the Loudspeaker.
It is recommended that the Professionals at your McIn-
tosh Dealer, who are skilled in all aspects of installation
and operation, install the XCS2K Loudspeaker System and
any associated audio equipment.
CAUTION: When this Loudspeaker is assembled it weighs
294 pounds (133.4 kgs). It requires three or more
persons to safely handle during assembly, adjust-
ment and placement in the room.
1. Orient the XCS2K shipping carton with the arrows on
the outside of the carton pointing upward.
2. Remove the banding material from the shipping carton.
3. Lift off the top of the shipping carton and set it aside.
4. Remove the Top Foam from the Loudspeaker.
5. Remove the Blue Protective Cloth Cover and set it
aside.
6. While facing a side of the Loudspeaker, remove the side
cover by grasping the outside edges of the cover and
pulling towards you.
In a similar manner,
remove the other side
cover from the Loud-
speaker. Place both cov-
ers on to the previously
removed protective cloth
cover for safe keeping.
Refer to figures 9 and
10.
Location in the Room
The XCS2K Loudspeaker is designed for use as a Center
Channel in a Home Theater System. The optimal method
for selecting all the Loudspeaker Locations in a Home
Theater System includes the use of a real time spectrum
analyzer operated by an experienced system installer. An
uncompromising installation would take into consideration
the floor, wall and ceiling coverings, the type and place
-
ment of furniture and can even include the architectural
design of the room and its construction materials. In those
instances where placement in the room is fixed an environ-
mental equalizer may be needed to restore proper musical
balance.
The XCS2K Loudspeaker’s Smooth Frequency Re-
sponse may be altered by large object(s) located in the path
of the sound waves or by locating the Loudspeaker too
close to a side wall. There should be an unobstructed area
in front of the XCS2K Loudspeaker on either side of the
center axis for the best performance. The optimum loca-
tion in a Home Theater System is directly under or in front
of the TV/Monitor. Refer to figures 7 and 8.
Dimensions, con’t and Installation
Installation
Top View
Remove Covers
Left Side
Cover
Right Side
Cover
Figure 10
Figure 8
Figure 9
Side
Cover
Figure 7