Filter
Top Products
E 1 E 2
TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND
THAT NO OBJECT FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON
APPARATUS.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
WARNING:
The exclamation point inside
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PRECAUTIONS
LASER SAFETY
This appliance contains a laser. Only qualified
service personnel should attempt to repair it.
CAUTION
CLEANING:
CAUTION
CLASS 1 LASER PRODUCT
Use of controls or adjustments, or performance
of procedures other than those specified herein,
may result in hazardous radiation exposure.
DANGER: INVISIBLE LASER RADIATION
WHEN THE APPLIANCE IS OPEN AND
THE INTERLOCK IS FAILED OR
DEFEATED. AVOID DIRECT EXPOSURE
TO THE BEAM.
CAUTION: HAZARDOUS LASER
RADIATION WHEN THE APPLIANCE IS
OPEN AND THE INTERLOCK IS
DEFEATED.
CLASS 1 LASER PRODUCT
LASER DE CLASSE 1
KLASS 1 LASERAPPARAT
CAUTION:
The symbol of a lightning
flash with arrowhead inside
an equilateral triangle is
intended to alert the user to
the presence of uninsulated
dangerous voltage within
the product s enclosure,
which may be of sufficient
magnitude to constitute a risk
of electric shock to people
Warning: to reduce the risk of
electric shock, do not remove
the cover (or the back). There
are no user-serviceable parts
inside. Servicing should be
perfromed by qualified service
personnel.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this appliance near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Follow the manufacturer’s instructions for installation.
Do not install near radiators, heat registers, stoves, or other heat sources, including
appliances that produce heat (e.g.: amplifiers).
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades, with one wider than the other. A grounding-type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the plug
that is provided does not fit into your outlet, consult an electrician in order to replace the
obsolete outlet.
Protect the power cord from being walked on or pinched, especially at the plug, the outlet, and
the point where it exits from the appliance.
Only use attachments/accessories that are specified by the manufacturer.
Unplug the appliance during lightning storms or when it will not be used for long periods of
time.
All servicing must be performed by qualified personnel. Servicing is required when the
appliance has been damaged in any way, for example, if the power cord or plug is damaged, if
liquid has been spilled or objects have fallen into the appliance, if the appliance has been
exposed to rain or moisture, if the appliance does not operate normally, or if the appliance has
been dropped.
Do not expose this appliance to dripping or splashing water, and do not place objects filled
with liquids, such as vases, on top of the appliance.
CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE
WIDE SLOT, AND INSERT IT FULLY.
To avoid electric shock, this appliance must not be exposed to dripping or splashing water
Maintain a minimum clearance around the appliance for sufficient ventilation;
Ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains, etc.
Do not place any source of open flame, such as a lighted candle, on the appliance;
Before discarding the appliance, remove the batteries and place them in a proper battery collection
container.
Caution Mark is located on bottom of product
Always disconnect the appliance from the power supply before attempting to clean it.
Use a soft cloth moistened with soapy water, and wipe gently.
Do not use solvents or abrasive materials.
IMPORTANT
Since CD circuitry may cause interference to other radio or television tuners nearby, switch this unit off
when not in use or move it away from the affected radio tuner.
NOTE: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed
to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television operation (which can be determined by turning the equipment off), the
user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio / TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.