Mach Speed Technologies V5000 MP3 Player User Manual


 
9
Basic Operations
Power on
When powered off, slide the power switch to the ON position, and then press and
hold the PLAY button for 5 seconds.
Power off
When powered on, press and hold the power switch for 5 seconds to power off.
Please note that if you set the power switch to the OFF position, you will lose any
saved settings.
Volume Control
When playing music, FM radio, and video, you can perform volume control using
the "+/-" button. "+" button is for increased volume and "-" key is for reduced
volume. Hold the key "+" or key"-" to continuously increase or reduce volume
Charging
This unit can be recharged by USB port, you can also use the designated normal
charger which was provided to you with the unit (output current 2A, output
voltage 5V~5.2V) to charge it. Simply connect the player to the charger or USB
port to charge it.
Using the Micro SD card
After this unit is connected with the computer, you will find two removable disks.
The first one is the built-in memory disk for this unit and the other is the disk for
the Micro SD card. If no card is inserted, the second disk can not be accessed.
This unit supports Micro SD cards from 1GB to 32GB.