Filter
Top Products
66
information to work with, it can provide better predictions. In order to
help with this, we've designed the iFINDER with a Sleep Mode that al-
lows it to conserve battery life, while occasionally waking up just enough
to take a pressure reading. This allows the unit to continue to build an
accurate pressure history even when you're not actively using it.
There are two ways to enable Sleep Mode. If you're viewing the Digital
Data display, simply press
MENU and select ENABLE SLEEP MODE, then
press
ENT.
If you're viewing one of the other displays, press
MENU|MENU|↓ to
SYSTEM SETUP|ENT|↓ to ENABLE SLEEP MODE|ENT.
A dialog will ask you to confirm your choice. Choose
YES, and the
iFINDER will appear to turn off.
When the iFINDER is in Sleep Mode, you can return to normal operation
by pressing
PWR. You can also use the Instant-On Compass feature to
briefly display the compass reading, without reactivating the entire unit.
GPS Simulator
The GPS simulator lets you use the unit as if you were outdoors navi-
gating somewhere. You can set the starting location in lati-
tude/longitude (Starting Position) or from a stored waypoint, map place
or POI location (Select Starting Waypoint). You can steer your position
on the map by using the arrow keys (
STEER W/ ARROWS) or by setting the
track and speed in the boxes provided on simulator screen.
To get to the GPS Simulator:
1. Press
MENU|MENU|↓ to GPS SETUP|ENT.
2. Press ↓ to
GPS SIMULATOR|ENT.
The GPS Simulator Menu.