Filter
Top Products
56
3. Press ↑ to
DISTANCE|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the distance is cor-
rect. Press
ENT.
4. Press ↑ to
BEARING|ENT. Press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the bearing is cor-
rect. Press
ENT.
5. Press ↓ to
PROJECT|ENT. The Edit Waypoint menu appears. You can
simply save the new projected waypoint by pressing
EXIT|EXIT or you
can edit the waypoint. (Press
EXIT|ENT if you want to immediately be-
gin navigating to the new waypoint.)
Select a Waypoint
To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. A highlighted
halo will appear around the waypoint.
Delete a Waypoint
To delete a waypoint: press
FIND|ENT|↓ to NAME|ENT|ENT|↓ to way-
point name|
ENT|→ to DELETE|ENT|← to YES|ENT. To return to the pre-
vious page, press
EXIT|EXIT.
Edit a Waypoint
Waypoint Name
To edit waypoint name: press FIND|ENT|↓ to NAME|ENT|ENT|↓ to way-
point name|
ENT|→ to DELETE|ENT|← to YES|ENT. To return to the pre-
vious page, press
EXIT|EXIT.
Waypoint Symbol
To edit waypoint symbol: 1. Press FIND|ENT|↓ to NAME|ENT|ENT|↓ to
waypoint name|
ENT|→ to EDIT SYMBOL|ENT. 2. Use arrow keys to select
desired symbol and press
ENT. To return to the previous page, press
EXIT|EXIT|EXIT.
Waypoint Position
To edit waypoint position: 1. Press FIND|ENT|↓ to NAME|ENT|ENT|↓ to
waypoint name|
ENT|→ to EDIT POSITION|ENT.
2. Latitude: press
ENT, then press ↑ or ↓ to change the first character,
then press → to the next character and repeat until the latitude is cor-
rect. Press
EXIT.
3. Longitude: press ↓|
ENT, then press ↑ or ↓ to change the first charac-
ter, then press → to the next character and repeat until the latitude is
correct. Press
EXIT.