Filter
Top Products
WS-7220U-IT
915 MHz
Wireless Weather Station
Instruction Manual
Contents
Language Page
Englis
h 2
French 24
Spanis
h 48
TABLE OF CONTENTS
Topic Page
Introductio
n 3
Inventory of Contents 4
Qui
ck Set Up 4
Detailed Set Up 6
Batte
ry Installation 6
12 or 24 Hour
Time Display 8
Time Settin
g 9
Features 10
Mini
mum & Maximum Temperature
and Humidity 10
Resetting Mini
mum & Maximum
Temperature and Humidity 10
Adding Additional
Thermo-Hygro
Sensor
s 11
Viewing & Operating with Multiple
The
rmo-Hygro Sensors 13
Mountin
g 13
Troubleshooting 17
Maintenance & Care Inst
ructions 18
Spe
cifications 18
Warranty Information 19
I N S T A N T
TRANSMISSIO
N
is the state-of-the-
art new wireless
transmission technology, exclusively
designed
and developed by LA CROSSE
TECHNOLOG
Y.
INSTANT TRANSMISSION
offers you can an immediate update (every 4
seconds!)
of all your outdoor data measured
from
the transmitters: follow your climatic
variations in real-time!
Outdoor
Temperature
(˚F or ˚C)
Indoor
Temperature
(˚F or ˚C)
Connection w
/
Sensor
Icon
Low Battery
Indicator
12 or 24 Hour
Time
Display
Outdoor
Hu
midity
(%RH)
Minimum/
Maximum &
Plus
Button
This product offers:
Figure 1
Set/Channel
Button
Figure 2
Mounting
Bracket
Wireless
Thermo-hygro
Sensor
TX29UD-TH-IT
INVENTORY OF CONTENTS
1. Wireless Weather Station (Figure 1)
2. Wireless Thermo-Hygro Sensor (TX29UD-TH-
IT)
and mounting bracket. (Figure 2)
3. 3 each, 1/2" Philips screws.
4. One strip of double sided adhesive tape.
5. Instruction Manual and Warranty Card.
ADDITIONAL EQUIPMENT
(not in
cluded)
1. 1 Philips screwdriver.
2. 2 Fresh “AA” 1.5V Alkaline Batteries.
3. 2 Fresh “AAA” 1.5V Alkaline Batteries.
QUICK SETUP
Hint:
Use good quality Alkaline Batteries; avoid
rechargea
ble batteries.
1. Have the Wireless Weather Station and
the
rmo-hygro sensor 3 to 5 feet apart.
2. Batteries should be out of both units for 10
mi
nutes.
3. Place the batteries into the thermo-hygro
sensor
first and next into the Wireless
Weather Station.
4. DO NOT PRESS ANY BUTTONS FOR 15
MINUTES.
In
this time the Wireless Weather Station and
the
thermo-hygro sensor will begin to
com
municate with each other, and the display
will
show both the indoor temperature and an
outdoor temperature. If the Wireless Weather
Station
does not display both temperatures after
the
15 minutes, please retry the set up as stated
ab
ove. After both indoor and outdoor
tempe
ratures are displayed for 15 minutes you
can
place your thermo-hygro sensor outdoors,
and
set your time.
The
thermo-hygro sensor should be placed in a
dry, shaded area (ex: under the eve of a roof).
The
thermo-hygro sensor has a range of 330
feet. Any walls that the signal will have to pass
through
will reduce distance. An outdoor wall
or
window will have up to 20 feet of resistance
and
an interior wall will have up to 10 feet of
resistanc
e. Your distance plus resistance should
not
exceed 330 feet in a straight line.
NOTE:
Fog and mist will not harm your thermo-
GB
P.2
FCC ID: OMOTX29UTH (transmitter)
RF Exposure mobile:
The
internal / external antennas used for this mobile transmitter
must provide a separation distance of at least 20 cm (8 inches)
from
all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.”
Statement acco
rding to FCC part 15.19:
This
device complies with Part 15 of the FCC Rules. Operation
is
subject to the following two conditions: (1) this device may
not
cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired ope
ration.
Statement acco
rding to FCC part 15.21:
Modifications
not expressly approved by this company could
void the user’s authority to operate the equipment.
Statement acco
rding to FCC part 15.105:
NOTE: This equipment has been tested and found to comply
with
the limits for a Class B digital device, pursuant to Part 15
of
the FCC Rules. These limits are designed to provide
re
asonable protection against harmful interference in a
residential
installation. This equipment generates, uses and
can
radiate radio frequency energy and, if not installed and
used
in accordance with the instructions, may cause harmful
inter
ference to radio communications.
However, there is no guarantee that interference will not occur
in
a particular installation. If this equipment does cause harmful
inter
ference to radio or television reception, which can be
dete
rmined by turning the equipment off and on, the user is
encou
raged to try to correct the interference by one or more
of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
recei
ver.
• Connect the equipment into an outlet on a circuit different
from that to which the recei
ver is connected.
Consult
the dealer or an experienced radio/TV technician for
help
GB
P.3
GB
P.4
GB
P.5