Filter
Top Products
6
MULTIPLE REMOTE SENSOR
UNITS” section in the Detailed Set-
Up Guide.
1. Have the indoor weather station and
remote temperature/humidity sensor
3 to 5 feet apart.
2. Batteries should be out of all units
for 15 minutes.
3. Place the batteries into the remote
temperature/humidity sensor first,
then into the indoor weather
station.
(All remote temp/humidity sensors
must be started before the indoor
weather station)
4. DO NOT PRESS ANY BUTTONS
FOR 15 MINUTES.
In this time the indoor weather station
and remote temperature/humidity sensor
will start to communicate with each
other, and the display will show both the
indoor temperature and an outdoor