Filter
Top Products
11
7. The numeric-day will be flashing, use the CH button to set the
current day.
8. Press and release the SET button to confirm and to enter the
year setting mode.
9. The default-year will be flashing, use the CH to set the
appropriate year.
10. Press and release the SET button to confirm and to advance to
the °F or °C setting mode.
VII. SELECTING °F OR °C
1. Press and hold the SET button for 3 seconds, or until “12h” or
“24h” flashes in the DATE LCD.
2. Press and release the SET button 9 times to reach the °F or °C
setting mode.
3. “°F” is the default setting, and should be flashing in the
DATE LCD.
4. Press and release the CH button to shift °F to °C, and back.
5. Press the SET button to confirm your selection, and to
advance to the LCD contrast setting.
VIII. SETTING THE LCD CONTRAST
1. Press and hold the SET button for 3 seconds, or until “12h” or
“24h” flashes in the DATE LCD.
2. Press and release the SET button 10 more times to reach the
LCD contrast setting mode.
3. The default setting—“Lcd 5”—will flash in the DATE LCD.
4. There are 8 LCD contrast levels to choose from—“Lcd 0” is
the lightest, and “Lcd 7” is the darkest.
5. Press and release the CH button to toggle through the settings.
6. Press and release either the IN or OUT buttons to confirm all
the settings and to exit the manual-programming mode (or
wait 15 seconds for the unit to automatically return to the
normal display mode).